DATAQ Instruments Online ShoppingView Cart
Site Search:

DI-8B43 Isolated DC Transducer Amplifier Input Modules

±1V to ±5 Input Range

Product Features

  • Interfaces to DC Linear Voltage Displacement Transducers
  • High-Level Voltage Outputs
  • 1500Vrms Isolation
  • ANSI/IEEE C37.90.1 Transient Protection
  • Input Protection to 240VAC Continuous
  • 100dB CMR
  • 1kHz Signal Bandwidth
  • ±0.05% Accuracy
  • ±0.02% Linearity
  • Low Drift with Ambient Temperature
  • CE Compliant
  • UL/CUL Listing and ATEX Compliance Pending
  • Mix and Match Module Types

Products in the Series

DI-8B43-01
Voltage In with Excitation Out
$ 162
DI-8B Amplifiers
  • ±1 V measurement range
  • 1 kHz bandwidth
  • 10 V excitation output
  • For dc LVDTs and other sensors
Go to Product Page
DI-8B43-02
Voltage In with Excitation Out
$ 162
DI-8B Amplifiers
  • ±2 V measurement range
  • 1 kHz bandwidth
  • 10 V excitation output
  • For dc LVDTs and other sensors
Go to Product Page
DI-8B43-03
Voltage In with Excitation Out
$ 162
DI-8B Amplifiers
  • ±3 V measurement range
  • 1 kHz bandwidth
  • 10 V excitation output
  • For dc LVDTs and other sensors
Go to Product Page
DI-8B43-04
Voltage In with Excitation Out
$ 162
DI-8B Amplifiers
  • ±4 V measurement range
  • 1 kHz bandwidth
  • 10 V excitation output
  • For dc LVDTs and other sensors
Go to Product Page
DI-8B43-05
Voltage In with Excitation Out
$ 162
DI-8B Amplifiers
  • ±5 V measurement range
  • 1 kHz bandwidth
  • 10 V excitation output
  • For dc LVDTs and other sensors
Go to Product Page

8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B43 module isolates, filters, and amplifies a voltage input signal and provides an analog voltage output.

The 8B43 can interface to transducers that will operate on a 10V excitation voltage and up to 20mA of excitation current. Signal filtering is accomplished with a 5-pole filter optimized for time and frequency response which provides 100dB per decade of normal-mode rejection above 1kHz. One pole of this filter is on the field side of the isolation barrier for anti-aliasing, and the other four are on the system side.

A special input circuit on the 8B43 modules provides protection against accidental connection of power-line voltages up to 240VAC. Clamp circuits on the I/O and power terminals protect against harmful transients.

Isolation is provided by transformer coupling to suppress transmission of common mode spikes or surges. The module is powered from +5VDC, ±5%.

The modules are designed for installation in Class I, Division 2 hazardous locations and have a high level of immunity to environmental noise.