WinDaq Add-on Magic Meter

Operation

• Hover the mouse pointer to the upper left area of MagicMeter to reveal the configuration button
  
• Click the configuration button to adjust the setting
  
• Data Window to perform the following operations
• None: The most recent reading of the selected/highlighted channel when MagicMeter is started
• Average: Average all readings of the selected/highlighted channel when MagicMeter is started in the data window before presenting it
• Minimum: Display only the minimum reading of the selected/highlighted channel when MagicMeter is started within the data window
• Maximum:  Display only the maximum reading of the selected/highlighted channel when MagicMeter is startedwithin the data window
• RMS:  Perform RMS for all readings within the data window of the selected/highlighted channel when MagicMeter is started
• AC RMS:  Average all readings of the selected/highlighted channel when MagicMeter is started and use the result as offset. Remove the offset of all readings then perform RMS
• Calculated Channel: please click here to learn how to configurate the math expression. In this option, readings from any enabled channel can be used
  
• Select font color to indicate high/low limit
• Specifiy transparency level
• Double click on reading of MagicMeter to switch to transparent mode
• Although the reading appears to embed inside WinDaq, it is NOT. When you move WinDaq's window around or add/subtract channels, it will NOT follow your action
• The display is right-justified to align the units all the time, so make sure you make the width of the windows long enough to display ALL digits